By Fennie | 10 July 2020 | 0 Comments
Latest Mobile Phone Waterproof Coating Machine
Mobile phone waterproof coating machine is a new technology which to plate nano liquid for mainboard of phone and protect phone's components defend water attack. This product combines the world's most advanced modular design, turbofan pressurization, laser scanning, laser sputtering, vacuum dust, vacuum technology. So it is called vacuum waterproof coating machine as well. Now, let's introduce the function of this nano coating machine and how to use mobile phone waterproof nano coating machine.
After connecting the power supply, click the start power switch. The touch screen and the top cabin will light up. There are A/B/C three channels at the top of the screen. That is to say, this machine can give three mobile phone waterproof coating processing at the same time. The side of the machine has audio playback function, it can be connected by USB/Bluetooth.
Open the top lid, you can see two red atomizers at first. After added the nanocrystalline, it will be atomization and cover to the mobile phone for waterproof.
There are three cell phone fixtures in the machine cabin, It is used to fix the mobile phone for easy operation. This fixture is elastic, so it will not cause any damage to the phone.
pay attention to the phone charging port. Target the seal below the letter. For some mobile phones that no holes at the top, we need to take out the SIM card so that convenient nano atomization from the SIM hole to enter, and becoming a loop is formed out of the charging port.
Cleaning the surface of the phone before operation, like dust treatment in the horn hole and etc. Then take out the SIM card.
Be careful the phone's direction when you put it in, make the charging port faces the letters and put your phone in fixture. Adjust knob to fix the phone and make the charging port close to the sealing port.
Notice:
Channel A is the system default. If you use B/C channel, you need to open the B/C channel on the touch screen.
The next step is to add waterproof nanometer. Do a cell phone nanometer waterproof fluid volume, it about 1.6 milliliters. Drop about 0.8ml into each cup.
Close the hatch and click the start button, you can see the atomizer cup spraying. After the device stopped, took out the phone, and clean again. It avoids nano liquid residue on the phone screen.
After cleaning, put it into the oven for quick atomization drying. Click on the screen for hot air convection. Place the phone in a side oven for 5 minutes. Take out the phone from oven and install SIM card for waterproof test.
Phone waterproof test successful
After connecting the power supply, click the start power switch. The touch screen and the top cabin will light up. There are A/B/C three channels at the top of the screen. That is to say, this machine can give three mobile phone waterproof coating processing at the same time. The side of the machine has audio playback function, it can be connected by USB/Bluetooth.
Open the top lid, you can see two red atomizers at first. After added the nanocrystalline, it will be atomization and cover to the mobile phone for waterproof.
There are three cell phone fixtures in the machine cabin, It is used to fix the mobile phone for easy operation. This fixture is elastic, so it will not cause any damage to the phone.
pay attention to the phone charging port. Target the seal below the letter. For some mobile phones that no holes at the top, we need to take out the SIM card so that convenient nano atomization from the SIM hole to enter, and becoming a loop is formed out of the charging port.
Cleaning the surface of the phone before operation, like dust treatment in the horn hole and etc. Then take out the SIM card.
Be careful the phone's direction when you put it in, make the charging port faces the letters and put your phone in fixture. Adjust knob to fix the phone and make the charging port close to the sealing port.
Notice:
Channel A is the system default. If you use B/C channel, you need to open the B/C channel on the touch screen.
The next step is to add waterproof nanometer. Do a cell phone nanometer waterproof fluid volume, it about 1.6 milliliters. Drop about 0.8ml into each cup.
Close the hatch and click the start button, you can see the atomizer cup spraying. After the device stopped, took out the phone, and clean again. It avoids nano liquid residue on the phone screen.
After cleaning, put it into the oven for quick atomization drying. Click on the screen for hot air convection. Place the phone in a side oven for 5 minutes. Take out the phone from oven and install SIM card for waterproof test.
Phone waterproof test successful
Leave a Reply
Your email address will not be published.Required fields are marked. *